pro clima TESCON INVIS
All-round tape with fleece carrier, for indoor and outdoor use, black
Product benefits
The text on this page has been translated using Microsoft Copilot. Mistakes are possible. In case of doubt, the original versions (Dutch and French) are correct.
- For indoor and outdoor use - reliably airtight and (driving) rainproof
- Waterproof bonding - SOLID adhesive
- Ideal for open cladding: invisible due to black color in combination with SOLITEX FRONTA facade membranes
- 6 months UV and weather resistant
Installer benefits
- Multi-purpose - adheres to most smooth and flat surfaces (membranes, wood (derivatives), mineral surfaces, etc.)
- Lifetime assurance - for contractor, builder, architect, etc.
- Easy to process
- Winter application: from -10°C
- Various widths: for optimal use
Applications
Invisible (driving) rainproof and windproof bonding of wall membranes behind open or closed cladding
Airtight and/or driving rainproof taping of:
- Membranes to each other (vapor barriers, underlay and wall protection membranes)
- Membranes to smooth adjoining building parts: wood (derivatives), mineral surfaces, metal, plastic, etc.
- Wood fiber boards, (ridge) gutters, in combination with TESCON SPRIMER or TESCON PRIMER RP
Product details
Installation steps
Installation steps
1. Preparation
Subsurfaces must have sufficient stability and be dry, level and free of dust, silicone and grease. Brush off subsurfaces; if necessary, clean with a vacuum cleaner and wipe down.
2. Taping of facade membranes on the exterior
For non-visible taping and joints for breather (WRB) membranes installed behind open-jointed cladding (e.g. SOLITEX FRONTA QUATTRO), centre TESCON INVIS on the strip overlap, roll it out and gradually stick in place.
3. Rub the tape firmly to secure the adhesive bond
Rub the adhesive joints firmly. Ensure that there is sufficient resistance pressure. This step can be carried out more efficiently and in a manner that is kinder to the hands by using the PRESSFIX application tool.
4. Alternative: Adhesive joints using DUPLEX
DUPLEX can be applied inside the overlap. Lift up the upper membrane strip, apply DUPLEX to one side, gradually remove the release film and stick in place. Rub the firmly with the PRESSFIX application tool. Ensure that there is sufficient resistance pressure.
5a. Sealing at ground slab
Joints with the ground slab or other mineral or rough subsurfaces can be implemented using the ORCON F adhesive sealant. Clean the subsurface. Apply a line of adhesive that is approx. 5 mm thick (more in the case of uneven subsurfaces, if necessary).
5b. Sealing at ground slab
Place the membrane strip onto the adhesive bed. Do not press the adhesive completely flat so as to allow for relative motion between components.
6a. Joints with OSB/planed wood
To implement windproof joints between facade membranes and smooth, non-mineral subsurfaces such as wood-based panels or planed wood, centre TESCON INVIS on the joint and gradually stick it in place.
6b. Joints with unplaned wood
Use ORCON F adhesive sealant on unplaned beams, rafters or purlins. Apply a line of ORCON F that is approx. 5 mm thick. Use a thicker line of adhesive on rough subsurfaces, if necessary.
7. Taping of underlay panels (MDF)
Underlay panels made of MDF can be taped using TESCON INVIS. Centre the tape on the panel joint, roll it out and gradually stick it in place. Rub firmly using the PRESSFIX application tool to secure the adhesive bond. Ensure that there is sufficient resistance pressure. Wood-fibre insulation panels should be treated with TESCON PRIMER.
8. Detail solution for window joints
Stick the membrane to the window frame in a windproof and waterproof manner using the TESCON INVIS all-round adhesive tape. Rub firmly using the PRESSFIX application tool to secure the adhesive bond.
9a. Detail solution for cable feed-throughs
Seal round cable feed-throughs with ROFLEX/KAFLEX grommets. The cable grommets are self-adhesive. Apply TESCON INVIS over the TESCON VANA tape. Tape the pipe grommets to the subsurface in an airtight manner using TESCON INVIS. Rub firmly using the PRESSFIX application tool to secure the adhesive bond. Ensure that there is sufficient resistance pressure.
9b. Detail solution for beam/joist penetrations
Windproof and waterproof joints with (planed) beams can be achieved using TESCON INVIS.
Sticking sequence: 1. Bottom, 2. Left and right, 3. Top.
Joints with rough subsurfaces can be implemented using ORCON F.
General conditions
Taped joints must not be subjected to tensile forces. Once membranes have been taped, the weight of the insulation material must be supported by laths. Adhesion should be supported by additional laths, if necessary. Rub the adhesive tapes firmly to secure the adhesive bonds. Ensure that there is sufficient resistance pressure.
Windproof, airtight or rainproof sealing can only be achieved on vapour control or underlay/facade membranes that have been installed without folds or creases. Ventilate continuously and systematically to prevent build-up of excessive humidity; use a dryer if necessary. When plastering, please observe the recommendations of the plaster manufacturer for non-absorbent subsurfaces. A bonding course may be necessary.
| Reference Number | Attributes |
|---|---|
| 1AR02072 | Dimensions: 6cm x 30m |
| 1AR02628 | Dimensions: 15cm x 30m |
| 1AR02784 | Dimensions: 10cm x 30m |
pro clima CONTEGA SOLIDO IQ
Intelligent tape for airtight and driving rainproof sealing around windows and doors, and for connections wi
pro clima TESCON VANA
All-round tape with fleece carrier, for indoor and outdoor use
