Brand:

pro clima TESCON SPRIMER

Primer in spray form for indoor and outdoor use

Product benefits

The text on this page was automatically translated. Minor translation errors are possible. In case of doubt, the original versions (Dutch and French) are correct.

Easy to apply: directly with the spray can, no contamination of the primer in the can
Durable connections: penetrates deeply and strengthens dusty surfaces or surfaces with insufficient adhesion
Saves time: adhesive tapes can be bonded to absorbent surfaces without drying time
Flexible application: suitable for dry and slightly damp surfaces; can also be processed in frost

Applications

Suitable for preparing or reinforcing the surface before bonding with pro clima tapes.

Suitable for wood, wood fiber boards, masonry, roofs, walls, and floor panels.

Project types

Renovation,

New construction

Applications

Detail solution

Construction methods

Masonry (or concrete),

Timber construction (timber frame, CLT,...),

Steel frame construction

Construction elements

Product details

Installation steps

1. Prepare the subsurface

Brush off or wipe down the subsurface, if
necessary.

2. Prepare the can of primer

Shake the can vigorously for at least 20
seconds.

3a. Apply the primer

Spray TESCON SPRIMER from a distance of approx. 20 cm to the surface (e.g. wood-fibre, concrete or old timber) to form a seamless coating.

3b. Apply the primer

Spray TESCON SPRIMER from a distance
of approx. 20 cm to the surface to form a
seamless coating.

4. Turning the jet direction

The spray jet can be adjusted in the vertical or horizontal directions to suit the application situation.

6. Apply primer to wood-fibre underlay panels

5. Application of tapes

The pro clima adhesive tapes TESCON or
CONTEGA, for example, can be stuck onto
surfaces treated with primer without any
waiting period.

6. Final adhesive strength

The adhesive joint achieves its high final level of strength once the primer has dried fully.

General conditions

Shake the can well before application. The fan-shaped spray jet can be adjusted in the horizontal and vertical directions by turning the spray head nozzle. After every spray application, spray the can upside down until only blowing agent comes out so as to avoid blocking the valve riser tube and the spray head with primer residues. Wipe off any primer at the outlet of the nozzle.

Spray the surface to be stuck after cleaning it – spray distance 20 - 25 cm. Allow to ventilate for between 5 and 15 min. (depending on material and application). Repeat this procedure again for absorbent subsurfaces.