Brand:

pro clima TESCON PRIMER RP

Solvent-free primer for indoor and outdoor use

Product benefits

The text on this page was automatically translated. Minor translation errors are possible. In case of doubt, the original versions (Dutch and French) are correct.

Durable connections: penetrates deeply and strengthens dusty surfaces or surfaces with insufficient load-bearing capacity
Saves time: absorbent surfaces do not need to dry
More flexible work: applicable on dry and slightly damp surfaces, can also be processed in frost
Can be applied and distributed with one hand using the dispenser bottle
Excellent results in the harmful substances test, tested according to ISO 16000

Applications

Suitable for preparing or reinforcing the surface before bonding with pro clima tapes.

Suitable for wood, wood fiber boards, masonry, roofs, walls, and floor panels.

Project types

Renovation,

New construction

Applications

Detail solution

Construction methods

Masonry (or concrete),

Timber construction (timber frame, CLT,...),

Steel frame construction

Construction elements

Product details

Installation steps

1. Clean the subsurface

Subsurfaces must have sufficient stability and be level for permanent sealing to be achieved.

Remove any dust or wood shavings from the subsurface (brush off).

2. Adhesive bonds at roof valleys

Pre-treat wood fibreboards with TESCON PRIMER and create adhesive bonds in the area around roof valleys, ridges and panel joints (if necessary) using the TESCON VANA system adhesive tape.

3. Sealing to chimneys

Mineral subsurfaces such as plaster, concrete or similar surfaces can also be pre-treated with TESCON PRIMER and then taped in a reliable manner using TESCON VANA.

When plastering over the adhesive tape, please observe the recommendations of the plaster manufacturer for non-absorbent subsurfaces.

A bonding course may be necessary.

4. Joints with underlay membranes

Pre-treat wood fibreboards with TESCON PRIMER, stick the TESCON VANA all-round adhesive tape onto the wet primer and to the underlay membrane, and rub firmly to secure the adhesive bond. You’re finished!

5. Sealing at skylights

Adhesive bonds with TESCON PRIMER and TESCON VANA seal the transition between wood fibreboards and the deflector channel above the skylight in a reliable, waterproof manner.

6. Detail: Pipes

Ventilation pipes and other similar round penetrations can be sealed to the pre-treated panel using pro clima ROFLEX EPDM sealing grommets and TESCON VANA.